Language

Bahasa Indonesia

Back

Home

News

Cases & Solution

Blog

EN

Back

10HP/7.5KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

20HP/15KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

30HP/22KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

50HP/37KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

75HP/55KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

100HP/75KW @0.8/1.0/1.2Mpa @116psi/145psi/174psi

2-in-1 Screw air compressor @0.8Mpa/8bar/116psi [with air tank]

4-in-1 screw air compressor @0.8Mpa/1.6Mpa [with air tank]

Refrigerated dryer

Compressed Air Accessories

Hot melt adhesive machine

FAQ

EN

Search History

aircompressorfilter'

aircompressorfilter

air compressor filter

You May Also Like

Home > Cases > Chapter 9：Compressed Air Post-treatment Equipment Dryer > 9-19 What is the reason for excessive regeneration gas discharge during the regeneration cycle of the adsorption dryer?

Categories

Categories

9-19 What is the reason for excessive regeneration gas discharge during the regeneration cycle of the adsorption dryer?

Excessive gas discharge due to valve issues, open regulating valve, stuck shuttle.

Case Details

Answer: (1) The exhaust valve cannot be closed.

(2) The one-way valve fails.

(3) The regeneration gas regulating valve is open too much.

(4) The shuttle valve is stuck and not closed tightly.

Previous

9-18 Why can't the regeneration tower pressure of the adsorption dryer drop below?

Next

9-20 What are the reasons and troubleshooting methods for the two tanks of the heatless regeneration dryer not being able to switch normally?

All Collections: Air compressor; Refrigerated dryer; Hot melt adhesive machine; Accessories

Contact Us - SCAIR: No. 49 Lianhe Road, Fulong Village, Shipai, Dongguan City, Guangdong Province, China; admin@dgscee.com; +86-18922776417

Newsletter about air compressor: For more information, please follow our website

Follow Us

Copyright © 2021 Dongguan Shunchi Electromechanical Equipment Co., Ltd. - https://dgscee.com All Rights Reserved.